3/4 inch In-Line Valve (Male Thread)

«  ↑  »


3/4 inch In-Line Valve (Male Thread)

The Toro 3/4 inch In-Line Valve operates a flows as low as .5 GPM (gallons per minute.), making it perfect for drip irrigation zones. In-line valves can be installed below ground and housed in a plastic valve box which can be placed anywhere in the landscape without marring the view or disrupting maintenance activities. The Toro 3/4 inch In-Line Valve has an external bleed feature. External bleed is the best way to flush out dirt from the supply and lateral lines during new installations or repairs, because the water on top of the diaphragm is not vented back into the valve but instead onto the ground. This permits any debris to pass through the valve rather than becoming stuck in the valve. This feature is for those customers that like to turn on the valve at the manifold location for system check-ups or just extra watering and do not mind a little water on the ground at the valve location when the valve is operated in this manner. Self-cleaning premium-grade stainless steel metering pin and single-piece rubber diaphragm ensure reliable, leak-free valve closing. The high quality 24 volt AC solenoid with 18 inch lead wires permits easy access installation. Note: Check with city or local code compliance office to determine whether or not there are restrictions on the types of valves that can be used in your area. In-line valves may or may not require a separate anti-siphon/backflow prevention device.